2021년 국제학술지논문
연번 | 출판일자 | 논문정보 |
---|---|---|
38 | 2021-12-22 | Paper-Based Ionic Thermocouples for Inexpensive and High-Precision Measurement of Temperature, ACS Applied Materials and Interfaces, Vol. 13, No. 50, 2021, pp. 60154-60162 DOI : 10.1021/acsami.1c17059 |
37 | 2021-12-01 | A comparative feasibility study of the use of hydrogen produced from surplus wind power for a gas turbine combined cycle power plant, Energies, Vol. 14, No. 24, 2021 DOI : 10.3390/en14248342 |
36 | 2021-12-01 | Experimental investigation of fuel temperature effects on transient needle motion and injection velocity of solenoid type diesel injector, International Journal of Heat and Mass Transfer, Vol. 181, 2021 DOI : 10.1016/j.ijheatmasstransfer.2021.121838 |
35 | 2021-12-01 | Advanced control to improve the ramp-rate of a gas turbine: Optimization of control schedule, Energies, Vol. 14, No. 23, 2021 DOI : 10.3390/en14238024 |
34 | 2021-12-01 | Optimization of sizing and operation strategy of distributed generation system based on a gas turbine and renewable energy, Energies, Vol. 14, No. 24, 2021 DOI : 10.3390/en14248448 |
33 | 2021-12-01 | Near-Infrared Multilayer MoS2 Photoconductivity-Enabled Ultrasensitive Homogeneous Plasmonic Colorimetric Biosensing, Advanced Materials Interfaces, Vol. 8, No. 24, 2021 DOI : 10.1002/admi.202101291 |
32 | 2021-12-01 | Experimental Study on Rolling Friction Coefficient Controllability of Magnetorheological Elastomer, Journal of Tribology, Vol. 143, No. 12, 2021 DOI : 10.1115/1.4050086 |
31 | 2021-11-01 | Manufacturing process of polymeric microneedle sensors for mass production, Micromachines, Vol. 12, No. 11, 2021 DOI : 10.3390/mi12111364 |
30 | 2021-10-07 | DFT-Machine Learning Approach for Accurate Prediction of pKa, Journal of Physical Chemistry A, Vol. 125, No. 39, 2021, pp. 8712-8722 DOI : 10.1021/acs.jpca.1c05031 |
29 | 2021-10-01 | Temperature Gradient-Driven Multilevel and Grayscale Patterning of Tosylate-Doped Poly(3,4-Ethylenedioxythiophene) Films for Flexible and Functional Electronics, Advanced Materials Technologies, Vol. 6, No. 10, 2021 DOI : 10.1002/admt.202100613 |
28 | 2021-10-01 | Numerical study on mixing performance of separate-type HVAC system for industrial vehicles, Journal of Mechanical Science and Technology, Vol. 35, No. 10, 2021, pp. 4531-4541 DOI : 10.1007/s12206-021-0923-3 |
27 | 2021-09-15 | Multiscale model to predict fracture toughness of CNT/epoxy nanocomposites, Composite Structures, Vol. 272, 2021 DOI : 10.1016/j.compstruct.2021.114236 |
26 | 2021-09-10 | Mitigation of water and electrolyte imbalance in all-vanadium redox flow batteries, Electrochimica Acta, Vol. 390, 2021 DOI : 10.1016/j.electacta.2021.138858 |
25 | 2021-08-01 | Improving Water Management and Performance of an Air-Cooled Fuel Cell System Using Pressurized Air for Aviation Applications, Journal of the Electrochemical Society, Vol. 168, No. 8, 2021 DOI : 10.1149/1945-7111/ac1704 |
24 | 2021-07-01 | Conformation-modulated three-dimensional electrocatalysts for high-performance fuel cell electrodes, Science Advances, Vol. 7, No. 30, 2021 DOI : 10.1126/sciadv.abe9083 |
23 | 2021-07-01 | A study on the leakage characteristics of a stepped labyrinth seal with a ribbed casing, Energies, Vol. 14, No. 13, 2021 DOI : 10.3390/en14133719 |
22 | 2021-07-01 | Efficiency maximization of a quadruple power generation system with zero carbon emission, Energy, Vol. 226, 2021 DOI : 10.1016/j.energy.2021.120278 |
21 | 2021-06-01 | Simulation of Optimizing the Partial Load Performance of a Gas Turbine Combined Cycle Using Exhaust Heat Recuperation and Inlet Bleed Heating, Journal of Engineering for Gas Turbines and Power, Vol. 143, No. 6, 2021 DOI : 10.1115/1.4048845 |
20 | 2021-05-12 | An Electricity-Generating Window Made of a Transparent Energy Harvester of Thermocells, ACS Applied Materials and Interfaces, Vol. 13, No. 18, 2021, pp. 21157-21165 DOI : 10.1021/acsami.1c00164 |
19 | 2021-05-05 | Analysis of a phosphoric acid fuel cell-based multi-energy hub system for heat, power, and hydrogen generation, Applied Thermal Engineering, Vol. 189, 2021 DOI : 10.1016/j.applthermaleng.2021.116715 |
18 | 2021-04-27 | Few-Layer MoS2Photodetector Arrays for Ultrasensitive On-Chip Enzymatic Colorimetric Analysis, ACS Nano, Vol. 15, No. 4, 2021, pp. 7722-7734 DOI : 10.1021/acsnano.1c01394 |
17 | 2021-04-14 | Multidimensional and transient modeling of an alkaline water electrolysis cell, International Journal of Hydrogen Energy, Vol. 46, No. 26, 2021, pp. 13678-13690 DOI : 10.1016/j.ijhydene.2020.10.133 |
16 | 2021-04-14 | Analysis of performance improvement of hydrogen/bromine flow batteries by using bromate electrolyte, International Journal of Hydrogen Energy, Vol. 46, No. 26, 2021, pp. 13760-13774 DOI : 10.1016/j.ijhydene.2021.02.149 |
15 | 2021-04-12 | Multiscale modeling to evaluate combined effect of covalent grafting and clustering of silica nanoparticles on mechanical behaviors of polyimide matrix composites, Composites Science and Technology, Vol. 206, 2021 DOI : 10.1016/j.compscitech.2021.108673 |
14 | 2021-04-01 | Nozzle Tip Wetting in GDI Injector at Flash-boiling Conditions, International Journal of Heat and Mass Transfer, Vol. 169, 2021 DOI : 10.1016/j.ijheatmasstransfer.2021.120935 |
13 | 2021-04-01 | Effects of tip clearance, number of teeth, and tooth front angle on the sealing performance of straight and stepped labyrinth seals, Journal of Mechanical Science and Technology, Vol. 35, No. 4, 2021, pp. 1539-1547 DOI : 10.1007/s12206-021-0318-5 |
12 | 2021-04-01 | Unraveling the initial flash boiling spray formation at the same superheated index achieved by altering ambient pressure and fuel temperature independently, International Journal of Heat and Mass Transfer, Vol. 169, 2021 DOI : 10.1016/j.ijheatmasstransfer.2020.120897 |
11 | 2021-03-16 | Study of the characteristics of temperature rise and coolant flow rate control during malfunction of PEM fuel cells, International Journal of Hydrogen Energy, Vol. 46, No. 19, 2021, pp. 11160-11175 DOI : 10.1016/j.ijhydene.2020.04.221 |
10 | 2021-03-01 | Metal-foam-based cathode flow-field design to improve H2O retention capability of passive air cooled polymer electrolyte fuel cells, International Journal of Thermal Sciences, Vol. 161, 2021 DOI : 10.1016/j.ijthermalsci.2020.106702 |
9 | 2021-03-01 | Resistance temperature detectors fabricated via dual fused deposition modeling of polylactic acid and polylactic acid/carbon black composites, Sensors, Vol. 21, No. 5, 2021, pp. 1-9 DOI : 10.3390/s21051560 |
8 | 2021-02-10 | A Light-Driven Vibrotactile Actuator with a Polymer Bimorph Film for Localized Haptic Rendering, ACS Applied Materials and Interfaces, Vol. 13, No. 5, 2021, pp. 6597-6605 DOI : 10.1021/acsami.0c19003 |
7 | 2021-02-08 | Multiscale modeling of mechanical behaviors of Nano-SiC/epoxy nanocomposites with modified interphase model: Effect of nanoparticle clustering, Composites Science and Technology, Vol. 203, 2021 DOI : 10.1016/j.compscitech.2020.108572 |
6 | 2021-02-01 | Unveiling needle lift dependence on near-nozzle spray dynamics of diesel injector, Fuel, Vol. 285, 2021 DOI : 10.1016/j.fuel.2020.119088 |
5 | 2021-02-01 | Multiscale study for the temperature effect on the mechanical properties and fatigue crack growth rate of polyamide 66, Extreme Mechanics Letters, Vol. 43, 2021 DOI : 10.1016/j.eml.2020.101154 |
4 | 2021-01-10 | Performance analysis of Pt/TiO2/C catalyst using a multi-scale and two-phase proton exchange membrane fuel cell model, Electrochimica Acta, Vol. 366, 2021 DOI : 10.1016/j.electacta.2020.137484 |
3 | 2021-01-01 | Contribution of oxygen functional groups in graphene to the mechanical and interfacial behaviour of nanocomposites: Molecular dynamics and micromechanics study, International Journal of Mechanical Sciences, Vol. 189, 2021 DOI : 10.1016/j.ijmecsci.2020.105972 |
2 | 2021-01-01 | Experimental investigation on self-loosening of a bolted joint under cyclical temperature changes, Advances in Mechanical Engineering, Vol. 13, No. 8, 2021 DOI : 10.1177/16878140211039428 |
1 | 2021-01-01 | Preliminary study to validate practicality of Heat Recovery Boilers with Water Spray (HR-B/WS), Transactions of the Korean Society of Mechanical Engineers, B, Vol. 45, No. 10, 2021, pp. 429-437 DOI : 10.3795/KSME-B.2021.45.10.429 |